This website uses cookies. By using this site you agree to the terms outlined in our Privacy Policy.×
  • Ideal for indoor or shorter term outdoor use
  • Single or double sided option
  • Choose from 4 thicknesses: 3mm / 5mm / 6mm / 10mm
  • Graphics guaranteed against fade for 4 years
  • No need to laminate, unless you wish to add a cosmetic gloss or matt finish
  • Cut to any shape
  • Maximum size in one piece = 2440 x 1220mm
  • Double sided printing option available

Foamex Boards

Our Foamex display panels are ideal for office displays, exhibitions, point of sale, or shorter term exterior signage.

Printing on Foamex is a cost-effective way of having stunning signage for your business. The Foamex signs we print are weatherproof, use UV-resistant links and are printed in full colour.

Due to our flat bed printing process, there is no need to laminate your sign, unless you wish to extend the life of your board or you're looking for a cosmetic matt or gloss signage finish.

All our display panels are produced on high-quality durable Foamex material. A minimum of 5mm is recommended for exterior use.

Why not have your sign(s) cut to a bespoke shape in order to attract maximum attention? Simply select this option.

NOTE: The maximum size Foamex panel available in one piece = 1220mm x 2440mm. Sizes above this are not a problem, but will require a join when fitting. This is commonplace when fitting large signage.

Further technical info...

Samples are available of all panel thicknesses for the foamex signs - 3mm, 5mm, 6mm and 10mm. Please request your sample here.

There are two standard methods for fitting foamex panels, as follows:

Locators (interior use only)

Locators provide a ‘studded off’ effect, by mounting the panel a short distance off the wall. Using this method, all fixings are concealed behind the panel. We will send locators with your order, providing you check the 'locators option' during the order process.
(Please see picture and diagram for fitting reference).
TIP: Stick the male part of the locator to the board first and dab the centre of the end of the locator with a transferable marking such as chalk or marker pen. Hold the display in the desired position on the wall and press where the fixings are. The marks left on the wall will indicate where you need to drill and fix the female part.

Counter-sunk screws and caps
Using this method, fixing is achieved by screwing through the panel and plugging the wall/mounting surface. We will provide the relevant coloured concealing caps and cradles, providing you check this option during the order process. We do not provide the screws.

TIP: Always drill the board and surface together for best results.

Fitting service available - please e-mail us or call for a quote.

Note: The minimum foamex panel thickness recommended for exterior use is 6mm.

Next step

Lamination is not normally required due to our durable finish flat bed printing process, unless you wish to extend the life of your sign or you're looking for a cosmetic gloss or matt finish.

Next step

Do you need your display board to be cut to shape or left as a conventional rectangle/square?


Next step

Would you like printing on BOTH sides of the boards?

Next step

For a small cost, we will supply coloured caps to cover/conceal your screw fixing points. We will ensure that the cap colours match the colours on your sign (we will provide the relevant selection of colours/quantity required for your display board).

Next step
After you complete your order a member of our team will contact you to discuss your artwork requirements.
Product summary
    Total: £0.00 +VAT0.00 inc VAT)

    Product options are available.
    Click to view