This website uses cookies. By using this site you agree to the terms outlined in our Privacy Policy.×
  • Dibond signs are ideal for hardwearing exterior use
  • 3mm quality composite material
  • Graphics guaranteed against fade for 4 years
  • No need to laminate your printed alluminium sign unless you wish to add a cosmetic gloss or matt finish
  • Cut to any shape
  • Maximum size in one piece = 2440 x 1220mm
  • Brushed steel dibond signs also available here

About Dibond signage

Our Dibond signs are ideal for exterior retail signage, display boards or directional signage. Due to our flat bed printing process, there is no need to laminate your Dibond sign unless you wish to extend the life of your board or you're looking for a cosmetic matt or gloss signage finish. 

All our display panels are produced on 3mm high quality durable compressed aluminium material (also known as Dibond). Dibond boasts a smooth printing surface for a stylish finish that will be sure to capture the attention of potential customers. 

Benefits of Dibond printing

Dibond printing is the perfect solution if you are looking for a long-lasting, business sign board with a sleek finish. Due to them being weatherproof and highly durable, Dibond signs are great for outdoor use but aluminum signs can make excellent long term indoor signs too. 

Why not have your alluminum signage cut to a bespoke shape in order to attract maximum attention? Simply select this option. 

If you need help designing your Dibond aluminum sign board, please get in touch and one of our expert design team will be more than happy to talk you through it.

NOTE: The maximum size Dibond panel available in one piece = 1220mm x 2440mm. Sizes of aluminum signs above this are not a problem, but will require a join when fitting. This is commonplace when fitting large signage.

Samples are available of either white or brushed steel aluminium composite Dibond Please request your sample here.

There are two standard methods for Dibond panels, as follows:

Raised Studs

Raised studs provide a ‘stand off’ effect, by mounting the panel a short distance off the wall. Brushed or chrome aluminium raisers are available as an option when ordering.

Counter-sunk screws and caps
Using this method, fixing is achieved by screwing through the panel and plugging the wall/mounting surface. We will provide the relevant coloured concealing caps and cradles, providing you check this option during the order process. We do not provide the screws.

We have found through experience that fitters/customers prefer to drill their own holes in order to suit the surface/conditions. However we do offer this service at an additional cost. Please e-mail us should you have specific drilling requirements.

Fitting service available - please e-mail us or call for a quote.

Next step

Lamination is not normally required due to our durable finish flat bed printing process, unless you wish to extend the life of your sign or you're looking for a cosmetic gloss or matt finish.

Next step

For a small cost, we will supply coloured caps to cover/conceal your screw fixing points. We will ensure that the cap colours match the colours on your sign (we will provide the relevant selection of colours/quantity required for your display board).


Next step

Do you need your display board to be cut to shape or left as a conventional rectangle/square?


Next step

Would you like printing on BOTH sides of the boards?

Next step
After you complete your order a member of our team will contact you to discuss your artwork requirements.
Product summary
    Total: £0.00 +VAT0.00 inc VAT)

    Product options are available.
    Click to view