This top of the range professional roll-up banner features an attractive, slick design with no feet and polished silver trims. Banner graphics are replaceable and all roll-up banner graphics have a built-in anti-glare/anti-scratch property, eliminating the need for costly lamination.

The PRO Pull-Up Banner is a top quality roll-up banner, which is slightly taller than other models supplied by Adverset Display, giving your branding / marketing extra emphasis.

Available in two sizes, the Pro Pull-Up Banner can be purchased in either 800mm or 1000mm (w) x 2145mm (h), with a anodised silver base.

Building your stand:

• Take out the stand from the zip carry bag. Remove the pole elements from the slot in the base. The pole sections are spring loaded. Assemble into one piece by pulling and inserting each piece into the other.
• Insert one end of the pole into the round plastic slot in the top of the base.
• Position yourself behind the stand. Start pulling up the graphic, which will be just visible sticking out of the top of the base. Holding the pole, tilt the unit gently backwards until you can reach the top of the pole with the top of the graphic. Carefully insert the round plastic grommet into the top of the pole. DO NOT LET GO OF THE GRAPHIC.
• Your banner stand is ready for use.

Taking down your stand:

• Position yourself behind the stand. Holding the pole, tilt the stand backwards gently and pull up the grommet and strip at the top of the pole to release.
• Let the graphic down very slowly into the base taking care not to let go.
• Unassemble the poles by pulling out and bending into three.
• Fit pole elements back into slot in base and insert with base into zip carry case.
• You're ready for the road.