This website uses cookies. By using this site you agree to the terms outlined in our Privacy Policy.×
  • 2225mm(h), 1240mm(w), 306mm(d)
  • Stylish curved design for maximum visual impact
  • Includes full set of durable, heavy weight, 300 micron anti-scratch laminated display graphics
  • Includes luxury wheeled hard-shell carry case which converts into a counter* with wooden beech top
  • Includes 1 x PS1000 floodlight
  • All graphics fitted with magnetic tape and hangers ready for assembly

    * Optional printed graphic available for counter.

3x1 Pop Up Stands

The 3x1 Pop Up Stand is the smallest and most cost effective Pop Up Exhibition Stand available. This Pop-Up stand has all the features you need for an economical, stylish exhibition stand and is easy to assemble with a 'snap-up' magnetic frame and easy ‘clip-on' graphics. The 3x1 pop up exhibition stand is also ideal for promoting in foyers, reception areas and especially in locations where space is at a premium.

We include printing in the price, and you can either upload your own artwork, or consult our experienced design team. Our design team have extensive knowledge of designing artwork for a range of pop up exhibition stands. The 3x1 pop up exhibition stand includes a single floodlight along with a multifunctional case, making it one of the most versatile pop up stands on the market.

Click Here to Order Replacement Graphics for your Exhibition Stand

Whilst we can't send you a sample of an actual stand unit, we would be happy to supply material swatches for the graphic panels, if useful.

Pop-Up Display StandsErecting your pop-up stand is very straightforward. Here are a few easy steps:

1. Take out the main frame and pull up until it clicks into place (similar action to a clothes horse).
2. Take out the bag of magnetic strip bars and slot into the sections of the frame. They will click into place with ease.
3. Make sure you have an area of floor to work in. Locate the relevant graphic, which will be a corner piece. This will already attached to a hanger and will be fitted with magnetic strips on the reverse. Hang from the two slots located at the top of the corner section and let the graphic bend naturally. The magnets on the reverse of the graphic should snap into position. Repeat this for the centre panels which will be straight and then finish with the other corner piece.
4. Adjust the graphics if required by moving slightly on the hangers. There should be a small amount of adjustment available.
5. Attach the lights (see file on this under our download tab).
6. Fit the wooden counter top onto the carry case to convert into a counter. Attach the graphic around the counter (if applicable), secure at the back with the double sided velcro which will already be fitted.

You're ready to go!

Reverse the procedure to dismantle, taking care to roll the graphics up carefully - always roll with magnets on the inside, image to the outside.

Next step
Next step
After you complete your order a member of our team will contact you to discuss your artwork requirements.
Product summary
    Total: £0.00 +VAT0.00 inc VAT)

    Product options are available.
    Click to view